7th Grade STEAM 3rd Period Q1-10:23am to 11:18am Assignments
- Instructor
- Nadia Erwin
- Term
- 2022-2023 School Year
- Department
- Encore
- Description
-
Upcoming Assignments
No upcoming assignments.
Past Assignments
Due:
Today, I will not be here. Please complete the magazine worksheet. If you finish early please complete any work you have missed including bellwork. I will return on Friday.
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Due:
Today, I will not be here. Please complete the magazine worksheet. If you finish early please complete any work you have missed including bellwork. I will return on Friday.
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Due:
Today, I will not be here. Please complete the magazine worksheet. If you finish early please complete any work you have missed including bellwork. I will return on Friday.
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Please make sure you treat the substitute with respect and remember anyone's name that is left will have a consequence. Have a great day!
Due:
Complete the multiplication with negative numbers. Remember a (- x - = positive) and a ( + x - = negative)
Due:
Complete the multiplication with negative numbers. Remember a (- x - = positive) and a ( + x - = negative)
Due:
Complete the multiplication with negative numbers. Remember a (- x - = positive) and a ( + x - = negative)
Due:
Open the slideshow below and watch the videos/click on the links to learn about each invention. Then, answer the questions on the next slide.
Due:
Open the slideshow below and watch the videos/click on the links to learn about each invention. Then, answer the questions on the next slide.
Due:
Open the slideshow below and watch the videos/click on the links to learn about each invention. Then, answer the questions on the next slide.
Due:
This project will take two weeks to complete and will be in both digtial and paper packet form.
Due:
This project will take two weeks to complete and will be in both digtial and paper packet form.
Due:
This project will take two weeks to complete and will be in both digtial and paper packet form.
Due:
Complete the math problems below. To convert fractions to decimals divide the denominator (bottom) number by the numerator (top) number.
Due:
Complete the math problems below. To convert fractions to decimals divide the denominator (bottom) number by the numerator (top) number.
Due:
Complete the math problems below. To convert fractions to decimals divide the denominator (bottom) number by the numerator (top) number.
Due:
Open up the google doc below and tell me 1 thing about kinetic energy, 1 thing about potential energy, and one thing about how energy transfers from potential to kinetic energy.
Due:
Open up the google doc below and tell me 1 thing about kinetic energy, 1 thing about potential energy, and one thing about how energy transfers from potential to kinetic energy.
Due:
Open up the google doc below and tell me 1 thing about kinetic energy, 1 thing about potential energy, and one thing about how energy transfers from potential to kinetic energy.
Due:
During this challenge you will use forces and the law of conservation of energy in order to launch your marshmallow the farthest.
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Due:
During this challenge you will use forces and the law of conservation of energy in order to launch your marshmallow the farthest.
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Due:
During this challenge you will use forces and the law of conservation of energy in order to launch your marshmallow the farthest.
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Please note: Part of this assignment will be completed on paper. Make sure you receive the packet after you complete steps 1 and 2 from the Google Doc below.
This will be a group class wide competition. The group who can launch their marshmallow the farthest will earn a place to present their catapult in our showcase and a special treat!
Due:
Today you will be given a magazine and 2 worksheets to complete. The first worksheet is based on one article of your choice. The second worksheet (on the back of the first sheet) is based on a vocabulary word you found in the article (your choice). PLEASE RETURN THE MAGAZINE AT THE END OF THE PERIOD EVEN IF YOU ARE NOT DONE.
Due:
Today you will be given a magazine and 2 worksheets to complete. The first worksheet is based on one article of your choice. The second worksheet (on the back of the first sheet) is based on a vocabulary word you found in the article (your choice). PLEASE RETURN THE MAGAZINE AT THE END OF THE PERIOD EVEN IF YOU ARE NOT DONE.
Due:
Today you will be given a magazine and 2 worksheets to complete. The first worksheet is based on one article of your choice. The second worksheet (on the back of the first sheet) is based on a vocabulary word you found in the article (your choice). PLEASE RETURN THE MAGAZINE AT THE END OF THE PERIOD EVEN IF YOU ARE NOT DONE.
Due:
Follow these instructions to build your Pumpkin. If you create it correctly, we will be printing these during class on Thursday. Below is the instructions in words and attached is a Youtube video if you get stuck.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
Due:
Follow these instructions to build your Pumpkin. If you create it correctly, we will be printing these during class on Thursday. Below is the instructions in words and attached is a Youtube video if you get stuck.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
Due:
Follow these instructions to build your Pumpkin. If you create it correctly, we will be printing these during class on Thursday. Below is the instructions in words and attached is a Youtube video if you get stuck.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
PUMPKIN DIRECTIONS:
1. Open up a new TinkerCAD design
2. Rotate Work plane to look like a diamond shape
3. Select characters from the right drop down menu
4. Select the Egg shape
5. Hold down shift button and use the arrow on the top right side of the egg to rotate -90 degrees to the LEFT. The pointy side of the egg should be pointing to the back left of your screen,
6. Reset the work plane by clicking the home button
7. Select the egg by clicking on it
8. Duplicate the egg by holding down control and the letter D on your keyboard.
9. Hold down shift button and find the arrow buttons on your keyboard.
10. Rotate the new egg to the LEFT 45 degrees.
11. Push the LEFT arrow button on keyboard 10 TIMES.
12. Push the UP arrow 5 TIMES.
13. Hold down control button and the Letter D on your keyboard to create 6 more shapes until you have a completed pumpkin.
14. Select all shapes (8 shapes) by left clicking on your mouse and dragging the red box over all 8 shapes.
15. Then, group them together by clicking the "Group" button above the shapes menu.
16. Change the color of pumpkin to Orange
17. Click on the Basic Shapes drop down menu.
18. Select the PARABALIOD shape and drag it onto the work plane.
19. Click on the Paraboloid and use the arrows above the shape to rotate it 180 degrees (turn it in the upside down position). You can also use the Mirror tool above the basic shapes menu.
20. Drag and drop upside down Paraboloid onto the top center of the pumpkin (this is the stem)
21. Select the whole pumpkin again and select the align tool (upper right side of screen above the shapes menu). Then, use center black dots surrounding pumpkin to align the stem to the exact center of pumpkin.
22. Click on the Paraboloid and change the color to brown
23. Shrink the Stem by lowering it using the black arrow above the shape
24. Select both the pumpkin and the stem by left clicking on your mouse and dragging the red box over both shapes.
25. Then press the GROUP button again
26. This will change both the stem and the pumpkin to the same color
27. Click on the shape color and then click on multicolor. This will allow both stem and pumpkin to be different colors.
28. Drop the pumpkin onto the the work plane by pressing the Letter D on your keyboard.
29. Resize pumpkin if you wish
30. Rename your design on upper left corner of screen like this: Last Name, First Name, Period #
example: Erwin, Nadia, 2
If you do not rename your project correctly YOU WILL NOT BE ABLE TO PRINT
31. Lastly, download your project as an OBJ file onto your desktop, rename it to Last Name, First Name, Period # and upload it to this assignment on Google Classroom so I can print it.
Due:
Open the google drawing below. Arrange the circles in the correct order for the Engineering design process.
Due:
Open the google drawing below. Arrange the circles in the correct order for the Engineering design process.
Due:
Please attach your TinkerCAD file to this assignment for a grade. YOU WILL NOT BE GIVEN A GRADE if you do not attach your file.
Due:
Open the google drawing below. Arrange the circles in the correct order for the Engineering design process.
Due:
Please attach your TinkerCAD file to this assignment for a grade. YOU WILL NOT BE GIVEN A GRADE if you do not attach your file.
Due:
Please attach your TinkerCAD file to this assignment for a grade. YOU WILL NOT BE GIVEN A GRADE if you do not attach your file.
Due:
1. Click on link below
2. Log in with google school account
3. Watch Videos
4. Complete activity
2. Log in with google school account
3. Watch Videos
4. Complete activity
Due:
1. Click on link below
2. Log in with google school account
3. Watch Videos
4. Complete activity
2. Log in with google school account
3. Watch Videos
4. Complete activity
Due:
1. Click on link below
2. Log in with google school account
3. Watch Videos
4. Complete activity
2. Log in with google school account
3. Watch Videos
4. Complete activity
Due:
Place the sheet into 50% and complete the multiplication problems. You may use a calculator on your computer ONLY no cellphones.
Due:
Place the sheet into 50% and complete the multiplication problems. You may use a calculator on your computer ONLY no cellphones.
Due:
Place the sheet into 50% and complete the multiplication problems. You may use a calculator on your computer ONLY no cellphones.